Table of Contents
Advertisement
Membrane Installation, Removal & Replacement
Replacing and installing membranes in the pressure vessels is an easy process if you
have the proper information and tools at hand. Please refer to the following instructions
when removing and replacing membrane elements.
WARNING: ALL PRESSURE GAUGES MUST READ ZERO BEFORE PROCEEDING.
BEFORE ATTEMPTING, DISCONNECT THE POWER FROM THE SYSTEM AND
BLEED ALL WATER PRESSURE FROM THE SYSTEM!
1. Remove the end cap from the membrane housings. This is done by removing the 3/8"
tubing and turning the cap counterclockwise. The tubing has a lock clip. Remove the
clip and push in on the collet while pulling on the tubing. The tubing should easily
slide out.
2. Open the membrane bag containing the membrane element from the shipping box.
The membrane should be contained within a plastic oxygen barrier bag.
WEAR GLOVES FOR THE FOLLOWING STEPS IN ORDER TO NOT CONTAMI-
NATE THE MEMBRANE
Need help? 1.800.390.5936
21
www.uswatersystems.com
Advertisement
Table of Contents
