Proper Installation; Introduction - US Water Systems Fusion Oxi-Gen 089-FSF OG Series Installation, Operation And Maintenance Manual

Professional grade iron & sulfur removal system

Hide thumbs

Table Of Contents

Table of Contents

This water filtering system must be properly installed and located in accordance with the

Installation Instructions before it is used or the warranty will be void.

Do not install or store where it will be



exposed to temperatures below freezing or

exposed to any type of weather. Water

freezing in the system will break it. Do not

attempt to treat water over 100°F.

Do not install in direct sunlight. Exces-



sive sun or heat may cause distortion or

other damage to non-metallic parts.

Properly ground to conform with all govern-



ing codes and ordinances.

Use only lead-free solder and flux for all



The Fusion Oxi-Gen system provides iron and sulfur removal throughout the home. The Fusion

Oxi-Gen system should be installed at the point of entry to treat the entire home, both hot and

cold water.

The Fusion Oxi-Gen system's backwashing tank removes iron and sulfur using oxidation.

When water is used in the home, hydrogen peroxide is injected in the Fusion Oxi-Gen feed to

create super oxidation during operation. The Catalytic Carbon media in the Fusion Oxi-Gen

system tank provides filtration when the system is in service to collect contaminants oxidized

by the hydrogen peroxide. These contaminants are backwashed from the media surface when

the system regenerates.

Fusion Benefits

Iron & Sulfur Removal



Virtually maintenance free.



Improves the efficiency of water-using appliances



Simple installation



Safe for landscaping and lawn watering.



Compatible with all on-site and community wastewater treatment systems

