Setting A Passcode For A Personal Box - Sharp Facsimile UX-CC500 Operation Manual

4
Lift the handset.
START/MEMORY
5
Press
While recording, the display will show the time left to record.
6
When finished, replace the handset or press
To listen to an outgoing message
To listen to an outgoing message, follow Steps 1 and 2 of the above
procedure and then press
cannot be erased. If you need to change it, simply repeat the recording
procedure.

Setting a Passcode for a Personal Box

You can set a 3-digit passcode for each personal box. When this is done, the
passcode must be entered to listen to messages in a personal box at the fax
machine.
(Note: When listening to the messages in a personal box from its
corresponding cordless handset, is not necessary to enter the passcode. )
1
FUNCTION
Press
2
Press once and
3
Press .
and speak into the handset to record the message.
PLAY
. Note that the general outgoing message
once and once.
once.
Setting a Passcode for a Personal Box
STOP
.
Display:
T.A.D. SETTING
BOX PASSCODE
1=SET, 2=CLEAR
49