Sharp Facsimile UX-CC500 Operation Manual page 54

Operating the Answering System
Listening to received messages (at the fax machine)
When you return, the fax machine display will show the number of messages
recorded in each box. Follow the steps below to listen to your messages.
1
PLAY
Press .
If you only want to listen to new messages (messages not previously
listened to), continue to hold
2
If you wish to listen to the messages in a personal box, press the
number of the box.
Example:
3
Enter the passcode of the personal box.
Example:
4
The messages will play.
As each message plays, the date and time of recording will appear briefly in
the display. If no messages were received, NO MESSAGES will appear.
Repeat: To listen to a message a second time, press
playback of that message ends. To move back to the previous message,
press
Skip: To skip forward to the next message, press
Note: Playback will stop if you receive a call, lift the handset, or press
You can print out a list of your received messages that shows the date and
time that each was received. See page 99.
52
for Box 1
1
5 5 1
within 3 seconds of the beginning of the current message.
REPEAT
PLAY
down for at least two seconds.
before
REPEAT
0
.
SKIP
STOP
.