Editing And Clearing Auto-Dial Numbers - Sharp Facsimile UX-CC500 Operation Manual

Sending a Fax by Automatic Dialing

Editing and clearing auto-dial numbers

If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
FUNCTION
Press
2
Press
the display.
3
Press .
4
Press
1
If you selected CLEAR, go to Step 8.
5
If you selected EDIT, make the desired changes to the number.
Press
change, and then enter the new digit. The new digit will replace the old
digit.
If you do not wish to change the number, go directly to Step 6.
START/MEMORY
6
Press
7
Make the desired changes to the name.
Press
change, and then press the appropriate number key repeatedly until the
desired letter appears (see Step 5 on page 75). The new letter will replace
the old letter.
If you do not wish to change the name, go directly to Step 8.
76
once and once.
or until the number you wish to edit or clear appears in
for EDIT or for CLEAR.
2
or to move the cursor to the digit or digits you wish to
.
or to move the cursor to the letter or letters you wish to
Display:
<NEW NUMBER>
1=EDIT, 2=CLEAR