Loading An Operator's Templates On A700 - Honeywell Vocollect A700 Series Product Manual

Network Indic-
ator
Pulse

Loading an Operator's Templates on A700

You need a device with a charged battery, headset, and any other equipment
(belt, bar code reader) you are going to use. You must be within radio range.
Make sure the device is on or sleeping. The device should have a solid green
ring segment (on) or a rotating green ring (sleeping)
1. Press the Operator button.The device says "Current operator is operator
2. Press the + button or — button until the device says, "Change operator."
3. Press the Operator button.
4. The device says, "Please wait" and retrieves a list of operators and teams.
5. Press the + button or — button to scroll through the list of operator teams
6. Press the operator button.
7. Press the + button or — button to scroll through the list of available operator
8. Press the operator button.
23
Network
What is Happening
State
Connected to
Full network connection.
network
TIP
If the LEDs indicate that there is a problem, refer to information on
troubleshooting to solve the problem. See also
Indicated by LED.
name. Select menu item."
Wait for the device to say, "Select team".
If the device says "Current operator is (operator name). Change
l
operator", skip to step 8.
until you hear the name of a team to which you belong.
The device says, "Please wait" and retrieves a list of all operators who belong
to the team that was selected. The device then says, "Current operator is
(operator name). Select new operator."
names until you hear your name.
If you do not hear your name, press the yellow play/pause button to
l
cancel this operation and start over from step 2.
When selecting a team in step 5, choose the "All Operators" team.
l
Consult with your supervisor if you are not listed in the "All Operators"
l
team.
The device says, "Loading operator" and loads your templates. Once it has
loaded your templates, the device says, "Current operator is (your operator
When This Occurs
The device may be
requesting and receiving an
IP address.
Troubleshooting Problems
A700x Product Guide