Honeywell Vocollect A700 Series Product Manual page 114

Registry Key
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Decoding Security] - Decoding Verification
CenterDecoding
CenterDecodingTolerance
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Imager] - Imager Configuration
DecodeMode
AimerFlashing
Initial1DSearchArea
DPMMode
Damaged1DCodes
ExtensiveBarcodeSearch
A700x Product Guide
Default Value Description
Only decodes a bar code if it is in
0x0
the center of the frame.
Amount of tolerance for what is
considered the "center". Range is
0x0 0x0 - 0x64 (0 to 100), where "0x0"
is the least tolerant (must be aimed
exactly).
Decoding mode, where 0 = linear
0x1 imager emulation, and 1 = 2D
imager.
Aimer mode, where 0 = on, 1 =
0x1 decode optimized (flashing at
frame rate), and 2 = off.
For 1D bar codes, sets the initial
search area. 0 = center, 1 = upper
0x0 half, 2 = lower half, 3 = full, 4 =
"smart raster" (better for non-
horizontal).
Enhances the ability to read a
DPM (Direct Product Marking) bar
0x0
code where the bar code is marked
directly on the product.
Enhances the ability to read
0x0 damaged or badly printed 1D bar
codes.
The decoding algorithms spend
0x0
more time trying to find a bar code.
106