Related Manuals for Charder MHS 2510I
Summary of Contents for Charder MHS 2510I
- Page 1 Operating manual MHS 2510I Scale Version 0.0/English Subject to technical modifications 05.04.2018...
-
Page 2: Table Of Contents
BEKA Hospitec GmbH Table of contents Imprint ......................... 4 Acknowledgement ................... 4 Manufacturer’s address ................... 4 Dealer ......................4 TÜV quality seal ....................4 Introduction ......................5 Preface ......................5 Liability and warranty ..................5 The operating manual ..................6 Validity ...................... - Page 3 BEKA Hospitec GmbH Disposal of the packaging material ..............13 Disposal of the product ...................13 Troubleshooting/After-sales service ..............14 10.1 Possible error message on the screen ............14 Assembly/Disassembly ..................15 11.1 Replacing the Batteries ..................15 Appendix ......................16 12.1 Technical data ....................16 12.2 Declaration of Conformity ................17...
-
Page 4: Imprint
9001 and DIN EN ISO 13485 by TÜV SÜD Product Service GmbH. Therefore, the development, manufacturing, quality assurance and service of our entire product range is subject to high quality standards. Operating manual MHS 2510I V0.0 E Page 4 of 21... -
Page 5: Introduction
Subject to technical modifications and error. The product is equipped with “B”-Type applied parts. All exposed, touchable, conductive parts are thereby considered as applied part. Operating manual MHS 2510I V0.0 E Page 5 of 21... -
Page 6: The Operating Manual
Description In this manual, the product will be called “scale”. Operating manual MHS 2510I V0.0 E Page 6 of 21... -
Page 7: Safety
Waste equipment that is no longer functional or suitable for use must be disposed of separately from normal household wastes, in accordance with the national and local regulations on environmental protection and raw material recycling. Operating manual MHS 2510I V0.0 E Page 7 of 21... -
Page 8: List Of Used Safety Instructions
Manufacturer Installation The scale is supplied ready for use. Connection to lift is required if installed after original purchase. Battery For the operation of the scale, 6 AAA-batteries are required. Operating manual MHS 2510I V0.0 E Page 8 of 21... -
Page 9: Operating Elements And Their Function
Operating elements and their function Display N° Description N° Description HOLD display Gross weight Net weight Display in kg Keypad N° Description N° Description ON/OFF/ZERO/TARE button HOLD/Settings button Operating manual MHS 2510I V0.0 E Page 9 of 21... -
Page 10: On/Off/Zero/Tare Button
• Press the HOLD/Settings button until the message END is displayed on the screen • Press the ON/OFF/ZERO/TARE button to terminate the setting procedure. After a few seconds, you will be redirected to the weighing process Operating manual MHS 2510I V0.0 E Page 10 of 21... -
Page 11: Set Acoustic Signal (Beep)
• Select kg (#4) and change to lbs. Operation CAUTION During the weighing process, the aluminium block (A) must not touch the wall of the support (H) (see image below). Operating manual MHS 2510I V0.0 E Page 11 of 21... -
Page 12: Weighing A Patient
Proceed in the following way to weigh a patient (with tarring): • Switch the scale on with the ON/OFF/ZERO/TARE button • Wait a few seconds, until the scale displays 0.0 kg (0 lbs) Operating manual MHS 2510I V0.0 E Page 12 of 21... -
Page 13: Cleaning/Disinfection
For an environmentally-sound disposal, BEKA Hospitec GmbH can provide more information. Please clean and disinfect the scale prior to its disposal as well. Operating manual MHS 2510I V0.0 E Page 13 of 21... -
Page 14: Troubleshooting/After-Sales Service
Troubleshooting . Please contact the after-sales service of your dealer (chapter 1.3). Dealer: BEKA Hospitec GmbH Am Rübenmorgen 3 35582 Wetzlar Phone: +49(0)641-9 22 22-0 Fax: +49(0)641-9 22-22-20 info@beka-hospitec.de Handicare Canada: 1-877-304-5438 Handicare USA: 1-866-891-6502 Operating manual MHS 2510I V0.0 E Page 14 of 21... -
Page 15: Assembly/Disassembly
1. Remove the cover of the battery 2. Remove the battery enclosure compartment 3. Replace the old/used batteries 4. Put the enclosure back with 6 new ones. 5. Re-install the cover on the battery compartment Operating manual MHS 2510I V0.0 E Page 15 of 21... -
Page 16: Appendix
-20 °C (-4 °F) + 60 °C (+140 °F) temperature and atmospheric 10% - 95% RH humidity 12 x 7 x 16 cm (4.72” x 2.76” x 6.3”) Dimensions Batteries 1.5 V AAA * 6 batteries Operating manual MHS 2510I V0.0 E Page 16 of 21... -
Page 17: Declaration Of Conformity
12.2 Declaration of Conformity Operating manual MHS 2510I V0.0 E Page 17 of 21... - Page 18 Operating manual MHS 2510I V0.0 E Page 18 of 21...
- Page 19 Operating manual MHS 2510I V0.0 E Page 19 of 21...
- Page 20 Your notes …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… …………………………………………………………………………………………………… Operating manual MHS 2510I V0.0 E Page 20 of 21...
- Page 21 BEKA Hospitec GmbH ●Am Rübenmorgen 3 ●35582 Wetzlar Germany● Phone/Fax:+49(0)6 41-9 22 20-0...
Need help?
Do you have a question about the MHS 2510I and is the answer not in the manual?
Questions and answers