Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 2742
Summary of Contents for Ronix 2742
- Page 1 ROTARY HAMMER 40MM 2742...
-
Page 2: Specifications
SPECIFICATIONS Model 2742 voltage 220-240V/50Hz power 1350W No load speed 150~516 RPM Impact rate 3000 BPM Impact energy Max Drill Capacity 40mm Net Weight 8.3Kg SDS MAX 16x320mm 4-cut Drill bit SDS MAX 22x320mm 4-cut Drill bit 25x350mm Point chisel... -
Page 3: General Safety Rules
GENERAL SAFETY RULES WORK AREA - Keep work area clean and well lit. Cluttered and dark areas invite accidents. - Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. - Page 4 operating power tools may result in serious personal injury. - Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. - Avoid accidental starting. Ensure the switch is in the off position before plugging in.
- Page 5 - Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. - Keep cutting tools sharp and clean.
-
Page 6: Before Use
cable but immediately pull the mains plug. - Never use the machine with a damaged cable. - Wear safety glasses, protective gloves and sturdy shoes. - Wear ear protection to prevent damage to your hearing. - The machine must not be damp and must not be operated in a wet environment. -
Page 7: Operation
TOOL CHANGING NOTE: Take care that the dust protection cap is not damaged when changing tools. SDS-MAX TOOLS The SDS-MAX tool is designed to be freely movable. This causes eccentricity when the machine is offload. However, the drill automatically centers itself during operation. This does not affect drilling precision. INSERTING TOOL - Clean lightly the tool before inserting. - Page 8 DEPTH STOP Loosen auxiliary handle (5). Adjust the drilling depth on the depth stop. Retighten the winged screw. OPERATING MODES WARNING! When switching operation modes, please trigger ON/OFF switch slightly. 1) Hammer Drilling 2) Chisel position adjustment 3) Chiseling USER MANUAL...
-
Page 9: Maintenance And Cleaning
- These instructions are printed without chlorine. - The plastic components are labeled for categorized recycling. NOTE: To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by RONIX SERVICE Authorized centers, always using RONIX replacement parts. ROTARY HAMMER 40MM...