Ronix 2707 Manual
  1. Manuals
  2. Brands
  3. Ronix Manuals
  4. Rotary Hammer
  5. 2707
  6. Manual

Ronix 2707 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ROTARY HAMMER
2707

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2707 and is the answer not in the manual?

Questions and answers

Related Manuals for Ronix 2707

Summary of Contents for Ronix 2707

  • Page 1 ROTARY HAMMER 2707...

  • Page 3: Specifications

    SPECIFICATIONS Voltage 220V Frequency 50HZ Input power 1500W No- load speed 800RPM Impact Rate 2700 BPM Impact Energy 4.5 J SDS+ 08x150 mm drill bit 1pcs SDS+ 10x150 mm drill bit 1 pcs Tool Holder Type SDS+ 12x150 mm drill bit 1pcs SDS+ 14x250 mm flat chisel 1pcs SDS+ 14x250 mm pointed chisel 1pcs Concrete 36mm...

  • Page 4: Parts List

    PARTS LIST ON/OF Selector Switch Switch Tool Holder Auxiliary Handle Selector Switch SAFETY SYMBOLEST In this operator’s manual /or machine’s labels following symbols are used: Read the operating instructions before use. Accordance with essential applicable safety of European directives Double insulation Denote risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instruction in this manual.

  • Page 5: General Power Tool Safety Warnings

    Immediately unplug the plug from the main electricity in the case that the cord gets damage and during maintenance. Faulty and /or discarded electrical or electronic apparatus have to be collected at the appropriate recycling location. Wear ear and eye protection. GENERAL POWER TOOL SAFETY WARNINGS WARNING! -Read all safety warnings and all instructions.

  • Page 6: Personal Safety

    - Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. - Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
  • Page 7 SERVICE - Have your power tool serviced by a qualified repair person using only identical replacement parts RONIX SERVICE after sales centers. This will ensure that the safety of the power tool is maintained. USER MANUAL...
  • Page 8 14) Any damage and abnormal happen, please stop to use immediately and disconnect it, ask RONIX SERVICE authorized centers to check and repair. 15) Right use accessories and parts: Don’t use other parts and acces-...

  • Page 9: Residual Risks

    18. In case of damage, the replacement of the plug or the supply cord shall always be carried out by RONIX SERVICE authorized centers. RESIDUAL RISKS Even when the power tool is used as prescribed it is not possible to eliminate all residual risk factors.
  • Page 10 3) Extension cord When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable. INSTALL OR REMOVE DRILL BIT CAUTION: please unplug the machine before installing or removing drill bit.

  • Page 11: On/Off Switch

    HAMMERING AND DRILLING FUNCTION Press down the small knob and turn the big knob till the to and release the small knob, then it is for drilling function only. Press down the small knob and turn the big knob till the release the small knob, then it drilling / hammering function.

  • Page 12: Warranty

    Faulty and /or discarded electrical or electronic apparatus have to be collected at the appropriate recycling location. CAUTION! Repair, modification and inspection of RONIX Power tools must be carried out by a RONIX SERVICE Authorized Centers. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.

Table of Contents