5: Operation; 5-1: Operational Tests And Adjustment; 5-1-1: Telephone Equipment; 5-1-1-1: Acquire Image, Image Transmission And Reception - AOR Trans.View AR570 Operating Manual

5: Operation

This section describes operational test you can perform to make sure your AR570 is connected
and operating properly. This section is also describes the function of each controls indicators and
jack, as refer to the illustration below.
Front View
Rear View

5-1: Operational Tests and Adjustment

5-1-1: Telephone Equipment

5-1-1-1: Acquire image, image transmission and reception

Make sure you have the AR570 connected to a suitable power source by a supplied DC power
cord with a DC plug. (Be carefully the polarity on the terminal of the power source.) Also make
sure you have the AR570 connected to your telephone line (TEL), video capturing device (VIDEO
IN) and video display device (VIDEO OUT) as described in the section of 4 Installation, on page
12 of this manual.
① Select transmission mode by MODE-SW Dip switch provided on the bottom of the AR570
(Refer to the section of 3-3-1: Mode Switch, on page 12 of this manual.)
29