Table of Contents
Advertisement
3-3-2-2: DTMF Remote Control
SW
SW 3
ON
Enable an automatic reception by DTMF tone control remotely. If this switch is
OFF, the remote control by DTMF tone is not activated.
SW 4
ON
Enable an automatic transmission using the TX switch of which is placed on
the front panel of the AR570. The TX swtich releases DTMF tone to enable the
automatic reception at a distant station.
You can control a distant station where is no operator attendance remotely by using this function.
3-3-3: NCU function (NCU-SW) (for only operation via leased line)
This section of DIP switches enables to use NCU (=Network Control Unit) functions that is
provided on the AR570 as the standard feature. A combination of the DIP switches can program a
number of Ring of which effects to turn the AR570 to reception.
Functions
16
Advertisement
Table of Contents
