3-4: Dtmf Commands; 3-5: Daytime Clock Adjustment And Program Phone Number - AOR Trans.View AR570 Operating Manual

3-4: DTMF Commands

The AR570 enables to control a distant station remotely using provided DTMF tones over line
links.
DTMF Command
1#
2#
3#
4#
5#
6#
7#
00#
*
Automatic
Disconnect
Special function

3-5: Daytime clock adjustment and program phone number

Acquire Live picture
Transmit Image
Acquire live picture and after that transmit the image
Change of transmission mode to High speed Monaural
Change of transmission mode to Normal speed Monaural
Change of transmission mode to High speed Color
Change of transmission mode to Normal speed Color
Make disconnect the line
Cancel of the received DTMF Control tone. But it is unable to accept
this cancel code after the AR570 entered in the specified Job already
by receiving the # tone.
Automatic disconnect is available by placing 0(=zero) on the front of
the DTMF command of 1#, 2# and 3#.
For example, if you specify the command as 03#, the AR570 will
acquire the live picture and transmit the image to a distant station.
After the transmission is over, the AR570 will make disconnect
automatically .
Cancel of the received DTMF Control tone. But it is unable to accept
this cancel code after the AR570 entered in the specified Job already
by receiving the # tone.
If the DIP SW4 on the AUTO-SW is ON, the DTMF command of 3#
will be released by pressing the TX switch placed on the front panel of
the AR570.
Functions
19