Table of Contents
Advertisement
activate to digitize the acquired picture and will store it onto the memory. After that, the AR570 will
transmit the image to a distant station over radio link or telephone line link under the picture mode
selected by the MODE DIP switch on the bottom side of the AR570. The job sequences using the
ACQ terminals are; (For telephone version)
Contacted the terminals→ → → → acquire live picture→ → → → hang up telephone line→ → → → make dialing to the
specified telephone number (Once the line is connected)→ → → → transmit the image→ → → → hang off the
line→ → → → standby.
SW
SW 3
ON
Enable to program the communication speed on the RS232C port. The setting
method is;
① Once the AR570 OFF.
② The HOLD switch is ON and turn the AR570 ON while pressing both TX and
RX switches.
Functions
13
Advertisement
Table of Contents
