Download Print this page

Menu System - Wilson Electronics WILSONPRO ENTERPRISE 1300 Installation Manual

In-building cell signal amplifier with frequency-specific outside antenna ports and lte connected remote monitoring
Hide thumbs Also See for WILSONPRO ENTERPRISE 1300:

Advertisement

Menu System

The Enterprise 1300 & 1300R takes about 8 seconds to boot up. Once boot up is
complete, the home screen will appear, showing the amplification and status of each
port and band.
Start Up Screen
Band Menu Color Description
6
IN-BUILDING CELL SIGNAL AMPLIFIER
Home Screen
A solid green light indicates that a band
is operating correctly with maximum
allowable gain.
A solid yellow light indicates band gain
reduction because of an oscillation
condition. Reposition antennas (increase
separation between indoor and outdoor
antennas, and point in opposite directions)
and then reboot (turn the unit off & on)
the Enterprise 1300 & 1300R system
to reactivate the band and maximize
performance. When adequate separation
is achieved, the yellow lights will return
to green upon reboot.
Note: when the light is yellow, the band
is operational; however, performance
is reduced.
ENTERPRISE 1300 & 1300R

Advertisement

loading

This manual is also suitable for:

Wilsonpro enterprise 1300r