Daikin Service Checker TYPE 3.1 Instruction Manual page 50

B. In case of transferring data from a floppy disk or other devices of a personal
computer to the hard disk
1. Select the [Operation data] at the upper left in the window.
2. After setting the floppy disk or other devices to the personal computer, select
the source of transfer by using the [Drive name] and the [Folder
name](directory name) at the right side in the window.
3. By using the list below the [Folder name], select the operation data.
4. Pressing the[←(F2)] to transfer the operation data and customer data.
C. If the operation data with the same title already exists, the following window is
displayed.
[Yes(F1)]:
[Overwrite all(F2)]: All the operation data after this are overwitten.
[No(F3)]:
[Cancel(ESC):
D. If the customer data with the same title already exists, the following window is
displayed. The functions of the buttons are same as the above [C].
[2] Transfer only customer data
Same as the [[1]Transferring operation data and customer data] other than selecting
the [Customer data] at the upper left in the window.
(3) After ending the data input, press the [Cancel(ESC)].
Only this operation data is overwitten.
While not overwriting this operation data, the next operation
data are successively being transferred.
Data transfer is stopped.
Chapter 5 Playing back of operation data
- 49 -