4.1.4 Displaying of operation data
The window of the [Operation Data Display] is displayed below.
The operation data for a system are displayed by pressing the button of the
[Operation Data Display(F6)] after selecting the [Display mode(F4)] in the
window of the [Network Map Display]. One window is displayed per one
system.
Analog data graph display
Digital data graph display
Possible to jump to another air conditioner in the same system.
(1) Analog data graph display(upper left in the window)
* Time and percentage ratio(-20% to +100%) to full-scale are indicated in the
* The number and color of a graph coincide with those of * at the left end in
* Eight items per an air conditioner can be displayed.
(2) Digital data(ON/OFF) graph display(left bottom in the window)
* In case of ON, blue bar is displayed.
* The number of a graph coincides with that of the left end in the data item in
* Eight items per an air conditioner can be displayed.
(3) Present value display of each item (list at the right side in the window).
Item of list
(left end)
Data item
Data
Update time
Full-scale
- 29 -
Present value for each data item
horizontal axis and in the vertical axis respectively. Since full-scale is
located at the end of the right side of data- item list in the window, see by
moving the horizontal scroll bar to the right. When at 100%, full scale value
is indicated.
the data item in the window.
the window.
Data in a graph corresponds to colored *.
From left, [Successive number], [Distinction and number of indoor and outdoor
unit], and [item name] are displayed.
Operation data are displayed.
In case of DIII-NET connection, updating of operation data of an indoor unit is at
intervals of several minutes.
The time of data updated is displayed.
In case of DIII-NET connection, there are items updating at intervals of several
minutes.
When graphing analog data, full-scale corresponds to a 100% value.
Vertical scroll bar
Horizontal scroll bar
Description
Chapter 4 Recording of operation data
Need help?
Do you have a question about the Service Checker TYPE 3.1 and is the answer not in the manual?
Questions and answers