Daikin Service Checker TYPE 3.1 Instruction Manual page 23

(5) This is the window of the [Access Method Selection].
(a) Be sure to input the [1. Network map name].
(b) Select the [2. Access method].
(c) If the selection is OK, press the [O.K.(F1)]. Proceed to the window of the
- 22 -
・ [DIII-NET]
・ [PCB connection] : do not use.
・ [Sensor input only] : Select this when monitoring the temperature and
[Network Map Display]. (Refer to "4.1.2 Network map display.") When
returning to the previous stage, press the [Cancel(ESC)].
: Possible to use only DIII-NET connection or in
combination with Sensor input. Possible to use air
conditioners conforming to the DIII-NET in internal and
external transmission method. Possible to identify
and select automatically the type of an air conditioner,
so, selection is not necessary.
pressure of an air conditioner in not conformity with
DIII-NET connection by an optional sensor kit.
Chapter 4 Recording of operation data