Switching On The Power Supply Of Checker Type - Daikin Service Checker TYPE 3.1 Instruction Manual

2.3 Switching on the power supply of Checker TYPE 3

Procedures
1) Connect the RS-232C cable attached to the Checker TYPE 3.1 to the RS-232C connector of
the Checker TYPE 3.1 and the Serial connector of a personal computer.
RS-232C connector (D-sub 9 pin)
USB cable (Power Supply) connector
2) Connect the Power Supply ( PC, AC-adapter, battery ) use USB cable, Power Supply connector
of the Checker TYPE 3. [ DC-5V ]
3) Turn on the Power Switch of the Checker TYPE 3.1. The red lamp of the Power Switch lights.
When the Checker TYPE 3 is normally operating, the green lamp flashes.
Power Switch Operation Lamp
- 14 -
Chapter 2 Connection to air- conditioner