Centralized Operation - Daikin Service Checker TYPE 3.1 Instruction Manual

4.3 Centralized operation

In the DIII-NET connection, the centralized operation of indoor units can be made from the
Service Checker TYPE Ⅲ.
(Notes)
The window of the [Centralized operation] is displayed by pressing the button of the
[Centralized operation(F7)] after selecting the [Map mode(F3)] in the window of the
[Network Map Display].。
The window of the
[Centralized operation]
In this window, air conditioners possible to make centralized operation displayed in order
of centralized address by icons.
The icons are displayed with colors changed according to the state of an air conditioner.
Color
Red
Purple
Green
Grey
- 39 -
If no centralized control equipment on the DIII-NET is provided, set centralized
address. After connecting the Checker TYPE 3 to the DIII-NET, and setting
customer data by the TYPE 3 software, display the window of the [Network
Map Display].
To set in this window centralized address to each indoor unit by using a
remote controller, centralized operation will become possible.
From the next time, the centralized operation can be performed without setting
the centralized address by using both customer data obtained this time and
the network map without setting of centralized adress.
Description
Error state
Transmission error
Operating state
Stopped state
Chapter 4 Recording of operation data