Daikin Service Checker TYPE 3.1 Instruction Manual page 27

C. Recording mode(F5)
Periodical record
setting(F6)
Periodical record start
Trigger inspection start Meeting trigger conditions
[Periodical record setting(F6)] :
[Periodical record start(F7)] :
[ Trigger record setting(F8)] :
[Trigger inspection start(F9)] :
- 26 -
Periodical record
start(F7)
The method of recording operation data consists of two: one is the
[Periodical recording] which records successively for a constant time, and
another is the [Trigger recording] which records before and after meeting
trigger conditions (conditions of digital data ON/OFF). The TYPE 3
software can set the method separately.
Periodical record
Trigger record
Recording mode(F5)
Trigger record
setting(F8)
By proceeding to the window of [Periodical
recording setting], Set the periodical recording.
Proceed to the sections of "4.2.1" and "4.2.2" for
periodical record setting.
By pressing this button, periodical record is started
to indicate [Periodical recording] in red at the upper
left in the window. The indication of the button is
changed to [Periodical record end(F7)]. Pressing
the button again, the periodical record is ended.
By proceeding to the window of [Trigger record
setting], set trigger record. Proceed to the "4.2.3
Setting of trigger record".
By pressing this button, trigger inspection is
started to indicate [Trigger inspecting] in red at the
upper left in the window. When meeting trigger
conditions to start trigger recording, the indication
of [trigger recording] is displayed. The indication
of the button is changed to [Trigger inspection
end(F7)]. Pressing the button again, the trigger
record is ended.
Chapter 4 Recording of operation data
Trigger inspection
start(F9)
time