Setting Of Customer Data - Daikin Service Checker TYPE 3.1 Instruction Manual

3.2 Setting of customer data
The TYPE 3 software manages the operation data of every customer. For that reason, be
sure to input customer ID at least. If the [Record only] without customer data management is
used in the DIII-NET connection, since restart standby is applied every time at the side of an
air conditioner, input customer data as much as possible.
(Note)
Other than input from the following step of [Customer data] menu, the input of
customer data is possible by selecting the [Record(F1)] of the [Main menu].
Procedures
1) Press the [Customer data(F4)] in the [Main menu] to display the window of the [Customer
selection].
2) When customer data are newly input, press
the [New customer(F3)] to display the window of the next [Input customer data].
・ When the current customer data need to be changed, select the customer by cursor, then,
press the [Edit customer data(F4)] to display the window of the next [Input customer
data].
・ When customer data need to be deleted, press the [Delete customer(F9)]
3) Be sure to input the [Customer ID] with alphanumeric letters to identify customers.
4) Input the [Customer name] as much as possible to display in the windows of the [Selection
of operation data] and others.
5) Other items are only for memos.
6) When ending, press the [Record(F1)] button. When returning to previous state (input
waiting state) without recording, press the [Cancel(ESC)] button.
Chapter 3 Starting up and ending of TYPE 3
- 16 -
software