Daikin Service Checker TYPE 3.1 Instruction Manual page 21

・ In case of recording operation data after inputting customer data for a new
・ In case of recording operation data for a previously input customer, press the
・ In case of recording operation data for a previously input customer after
・ In case of recording only operation data without customer management, press
(Notes)
1. In case of [Record only], be careful to note that operation data are overwritten
2. In case of recording customer data by the [Record only] in the DIII-NET
・ When deleting a customer data, press the [Delete customer(F9)]
・ When returning to the [Main menu], press the [Cancel(ESC)].
(3) In this window of the [Input customer data], input customer data.
・ Be sure to input the [Customer ID] with alphanumeric letters to identify
・ Input the [Customer name] as much as possible to display in the windows of
・ Use as memos items other than [Customer ID] and [Customer name].
When ending, press the [Record (F1)] button, and display proceeds to the
[Network map selection] window. Proceed to (4).
When returning to previous state(input waiting state) without saving the data,
press the [Cancel(ESC)] button.
- 20 -
customer, press the [New customer(F3)] and display proceeds to the [Input
customer data] window. Proceed to (3).
[Settlement customer(F2)] by placing the cursor in the customer name and
display proceeds to the [Network map selection] window. Proceed to (4).
changing customer data, press the [Edit customer data(F4)] by placing the
cursor in the customer name and display proceeds to the [Input customer
data] window. Proceed to (3).
the [Record only(F1)], and display proceeds to the [Access Method selection].
Proceed to (5).
every time.
connection, input customer data as much as possible since an air conditioner
will be set to restart standby every time.
customers.
the [Selection of operation data] and others.
Chapter 4 Recording of operation data