Daikin Service Checker TYPE 3.1 Instruction Manual page 26

(3) In the group of buttons displayed at the bottom of the window, by shifting a mode
with the upper 3 buttons, the bottom 4 buttons can execute each function.
A. Map mode(F3)
Map mode(F3)
Detail data input(F6) Centralized control(F7)
B. Display mode(F4)
Display operation data(F6)
- 25 -
[Detail data input(F6)]:
[Centralized control(F7)] :
[Update map(F8)] :
(Notes)
When pressing the [Yes(F1)], air conditioners on the DIII-NET are set to
standby for restart, making the thermostat switched off for several
minutes.
[Print screen (F9)] :
[Display operation data(F6)] :
(Note)
In case of the DIII-NET connection, after all icons of the system to be seen
have become colors other than white, display the operation data.
[Start DIIIdata recording(F7)] :
(Note)
If pressing this button, the indication is changed to [End DIIIdata
recording(F7)]. If so, press again to return to [Start DIIIdata recording(F7)].
[Display number of units(F8)] :
(Note)
In the PCB connection, the number of units of Super Multi and room air
conditioners is not displayed correctly.
Update map(F8)
In case of inputting detailed data such as
types, installation sites, press this button.
Proceed to the "4. 1. 3 Inputting of detailed
data".
In case of DIII-NET connection, the
centralized control of indoor units is possible.
Proceed to the "4. 3 Centralized control".
If the number of air conditioners has
changed or PCBs are replaced in the
DIII-NET connection, press this button to
search the data of network map.
Press this button to print the screen of network
map.
Display mode(F4)
Start DIIIdata recording(F7)
By proceeding to the window of [Display
operation data], system operation data are
displayed.
Proceed to the " 4.1.4 Displaying of operation
data".
Do not press the button since this function
is not used.
The number of connected outdoor units and
indoor units is displayed.
Chapter 4 Recording of operation data
Print screen (F9)
Display number of units(F8)