Alesis 03D Owner's Manual page 74

64
Chapter 6—Pan, Routing & Surround Pan
3+2+1 Surround Mode
03D—Owner's Manual
In 3+1 mode, channel routing and pan look like this. The pan control and 1 and
2 routing switches can still be used to assign the channel signal to bus outs 1 and
2. The SURR switch is used to assign the channel to the surround sound out-
puts.
The 3+2+1 surround pan mode uses six channels: front left, front
right, rear left, rear right, front center, and subwoofer. The front
speakers are fed from the 03D stereo output, the rear speakers are fed
from bus outs 3 and 4, the front center speaker is fed from bus out 1,
and the subwoofer is fed from bus out 2. The following illustration
shows a 3+2+1 surround sound system using the 03D. This could be
used for Dolby AC-3 Surround authoring.
PHONES ST OUT-L
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ST IN MONITOR PHONES
OUT
PAD
26dB 26dB 26dB 26dB 26dB 26dB 26dB 26dB SOLO/ 2TR IN
–16 –60 –16 –60 –16 –60 –16 –60 –16 –60 –16 –60 –16 –60 –16 –60 +10 +10 –20 +10 +10 –20 +10 +10 –20 +10 +10 –20 +10 +10 –20 +10 +10 –20 +10 +10 –20 +10 +10 –20 +10 +10 –20 0 10 0 10
+10 GAIN –34 +10 GAIN –34 +10 GAIN –34 +10 GAIN –34 +10 GAIN –34 +10 GAIN –34 +10 GAIN –34 +10 GAIN –34 GAIN GAIN GAIN GAIN GAIN GAIN GAIN GAIN GAIN LEVEL LEVEL
SETUP SCENE MEMORY SOLO
SCENE MIDI ST OUT-R
UNDO/
MEMORY UTILITY MIDI REMOTE REDO SOLO
DIO GROUP/PAIR SOLO SETUP AUTOMIX STORE RECALL
SCENE MEMORY USER DEFINE
CHANNEL CONTROL
VIEW FUNCTION USER DEFINE
DELAY/Ø DYNAMICS PAN/ROUTING
SEL CH 1 2
L STEREO R
CLIP
EQ LOW LO-MID HI-MID HIGH PARAMETER
–3
–6 3 4 BUS OUT 1
–9
EQ LIBRARY EQ FLAT –12
–15
–18
FADER MODE
–24
AUX 1 AUX 2 AUX 3 AUX 4 –30 ENTER
–36
–42
–48
FADER EFFECT 1 EFFECT 2
CURSOR
FADER
METER STATUS
MIXING LAYER FADER 1–8 9–12 13–16 ST IN EFFECT RTN
1–16
BUS OUT 2
17–24/MASTER
1 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 EFFECT
ST IN ST OUT
17 18 19 20 21 22 23 24 AUX1 AUX2 AUX3 AUX4 BUS1 BUS2 BUS3 BUS4 RETURN
SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL
ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
BUS OUT 3
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
BUS OUT 4
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
EFFECT
ST IN ST OUT
17 18 19 20 21 22 23 24 AUX1 AUX2 AUX3 AUX4 BUS1 BUS2 BUS3 BUS4 RETURN
Recorder
In 3+2+1 mode, channel routing looks like this. The pan control is replaced
with a sub woofer trim control, and routing switches 1 and 2 are replaced by a
subwoofer assign switch. The SURR switch is used to assign the channel to the
surround sound outputs.
Amps
FL
RL
SW
FC FR
RR