Effects Parameters - Alesis 03D Owner's Manual

Effects Parameters

REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB
PLATE
Parameter
REV.TIME 0.3–99.0 s
INI.DLY 0.1–500.0 ms
HI.RATIO 0.1–1.0
LO.RATIO 0.1–2.4
DIFF. 0–10
DENSITY 0–100%
THRU, 21 Hz–8.0
HPF
kHz
50 Hz–16.0 kHz,
LPF
THRU
E/R DLY 0.0–100.0 ms
E/R BAL. 0–100%
GATE LVL – , –60 to 0 dB
ATTACK 0–120 ms
1
HOLD
2
DECAY
1. 0.02 ms–2.13 s @ fs=32 Khz/44.1 kHz, 0.02 ms–1.96 s @ fs=48 kHz
2. 6 ms–46.0 s @ fs=32 Khz/44.1 kHz, 5 ms–42.3 s @ fs=48 kHz
EARLY REF., REVERSE GATE, GATE REVERB
Parameter
1
TYPE
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI.DLY 0.1–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–16
HI.RATIO 0.1–1.0
FB.GAIN –99 to +99%
THRU, 21 Hz–8.0
HPF
kHz
50 Hz–16.0 kHz,
LPF
THRU
1. EARLY REF. = S-Hall, L-Hall, Random, Reverse, Plate, Spring. REVERSE GATE & GATE
REVERB = Type-A, Type-B
Range
Length of the reverb.
Delay time until the early reflections of the reverb are
heard.
Length of the high frequency reverberation, expressed as a
ratio relative to REV.TIME.
Length of the low frequency reverberation, expressed as a
ratio relative to the REV.TIME.
Left/right spread of the reverb.
Density of the reverb.
Cutoff frequency of the high pass filter.
Cutoff frequency of the low pass filter.
Delay time from the early reflections (ER) until the reverb.
Volume balance between the early reflections and the
reverb. A setting of 0% is only ER, and 100% is only reverb.
Threshold level of the gate. The reverb will be cut off when
the input level drops below the specified value.
Time required for the gate to open.
Time from when the input level drops below GATE LVL until
the gate begins to close.
Time required for the gate to close completely.
Range
Type of early reflection (ER) pattern.
Indicates the size of the room; i.e., the spacing of the reflec-
tions.
Indicates how the reflections decay. 0: dead, 10: live
Delay time until the early reflections are heard.
Left/right spread of the reflections.
Density of the reflections.
Number of early reflections.
High frequency amount of the feedback, expressed as a
ratio relative to the FB.GAIN.
Amount of feedback.
Cutoff frequency of the high pass filter.
Cutoff frequency of the low pass filter.

Effects Parameters

Description
Description
03D—Owner's Manual
129