Alesis 03D Owner's Manual page 220

210
Chapter 17—Other Functions
Automix
#
18 Automix [REC]
19 Automix [PLAY]
20 Automix [STOP]
21 Automix [ABORT]
Channel Controls
#
22 CH Delay on/off
23 EQ on/off
24 Dynamics on/off
25 PAN Left
26 PAN Right
27 PAN Front
28 PAN Rear
For the stereo input channel, the effects returns channels, and the stereo output, PAN
LEFT and PAN RIGHT set the balance, not pan.
If a pair of USER DEFINE buttons are set to PAN LEFT and PAN RIGHT, or PAN
FRONT and PAN REAR, pressing those buttons together sets the pan or balance to cen-
ter.
Others
#
29 Peak Hold on/off
30 Oscillator on/off
User Define Button Indicators
Each USER DEFINE button has a LED indicator built-in. Operation of these indicators
depends on the selected function and is explained in the following table.
Function
1 to 17, 21
19, 20, 22,
23, 24, 29,
30
18
25 to 28
When a pair of USER DEFINE buttons are set to PAN LEFT and PAN RIGHT, or PAN
FRONT and PAN REAR, the indicators make it easy to check the pan position of the
03D—Owner's Manual
Function
Same as REC switch on Main automix page
Same as PLAY switch on Main automix page
Same as STOP switch on Main automix page
Same as ABORT switch on Main automix page
Function
Turn the selected channel's delay on or off
Turn the selected channel's EQ on or off
Turn the selected channel's dynamics processor on or off
Pan selected channel one step to the left
Pan selected channel one step to the right
Pan selected channel one step to the front (surround pan)
Pan selected channel one step to the rear (surround pan)
Function
Turn the meter Peak Hold function on or off
Turn the oscillator on or off
Type
Simple trigger Lights up momentarily when button is pressed.
ON/OFF oper-
Lights up when the specified function is on.
ation
Flashes in Rec Ready mode.
Automix REC
Lights up continuously during recording.
Lights up when the selected channel's pan control is at cen-
ter or in the direction of the specified function. For exam-
PAN
ple, the indicator of a button set to PAN LEFT lights up
when the pan control is set anywhere from L16 to center.
Description
Description
Description
Indicator Operation