Alesis 03D Owner's Manual page 144

134
Chapter 13—Onboard Effects
REV->CHORUS
Parameter
REV.TIME
INI.DLY
HI.RATIO
DIFF.
DENSITY
HPF
LPF
REV.BAL
FREQ.
PM DEPTH 0–100%
AM DEPTH 0–100%
MOD.DLY
WAVE
REV+FLANGE
Parameter
REV.TIME
INI.DLY
HI.RATIO
DIFF.
DENSITY
HPF
LPF
REV.BAL
FREQ.
DEPTH
FB.GAIN
MOD.DLY
WAVE
03D—Owner's Manual
Range
0.3–99.0 s Length of reverb.
Delay time until the early reflections of the reverb are
0.1–500.0 ms
heard.
Length of the high frequency portion of the reverb,
0.1–1.0
expressed as a ratio relative to REV.TIME.
0–10 Left/right spread of the reverb sound.
0–100% Density of the reverb.
THRU,21 Hz–8.0
Cutoff frequency of the high pass filter.
kHz
50 Hz–16.0 kHz,
Cutoff frequency of the low pass filter.
THRU
0–100% Balance of reverb and chorused reverb. 100 is only reverb.
0.05–40.00 Hz Modulation speed.
Pitch modulation depth.
Volume modulation depth.
Delay time from the direct sound until the modulated
0.0–500.0 ms
sound.
SINE, TRI Modulation waveform. SINE: sine wave, TRI: triangle wave
Range
0.3–99.0 s Length of reverb.
Delay time until the early reflections of the reverb are
0.1–500.0 ms
heard.
Length of the high frequency portion of the reverb,
0.1–1.0
expressed as a ratio relative to REV.TIME.
0–10 Left/right spread of the reverb sound.
0–100% Density of the reverb.
THRU, 21 Hz–8.0
Cutoff frequency of the high pass filter.
kHz
50 Hz–16.0 kHz,
Cutoff frequency of the low pass filter.
THRU
Balance of reverb and flanging. 0 is only flanging, 100 is
0–100%
only reverb.
0.05–40.00 Hz Modulation speed.
0–100% Modulation depth.
–99 to +99% Amount of feedback.
Delay time from the direct sound until the modulated
0.0–500.0 ms
sound.
SINE, TRI Modulation waveform. SINE: sine wave, TRI: triangle wave
Description
Description