Alesis 03D Owner's Manual page 143

DUAL PITCH
Parameter Range
PITCH 1 –24 to +24
FINE 1 –50 to +50 cent
PAN 1 L16–CENTER–R16 Pan for pitch change 1.
MODE 0–10
DLY 1 0.1–1000.0 ms
FB.G 1 –99 to +99%
OUT 1 –100 to +100
PITCH 2 –24 to +24
FINE 2 –50 to +50 cent
PAN 2 L16–CENTER–R16 Pan for pitch change 2.
DLY 2 0.1–1000.0 ms
FB.G 2 –99 to +99%
OUT 2 –100 to +100
REV+CHORUS
Parameter Range
REV.TIME 0.3–99.0 s
INI.DLY 0.1–500.0 ms
HI.RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
THRU,21 Hz–8.0
HPF
kHz
50 Hz–16.0 kHz,
LPF
THRU
REV.BAL 0–100%
FREQ. 0.05–40.00 Hz
PM DEPTH 0–100%
AM DEPTH 0–100%
MOD.DLY 0.0–500.0 ms
WAVE SINE, TRI
Description
Amount of pitch change 1 (semitones).
Fine adjustment (1 cent steps) for pitch change 1.
Precision of the pitch change. Higher settings will produce
more accuracy, but longer delay time.
Delay time of pitch change 1.
Feedback amount for pitch change 1.
Level of pitch change 1.
Amount of pitch change 2 (semitones).
Fine adjustment (1 cent steps) for pitch change 2.
Delay time of pitch change 2.
Feedback amount for pitch change 2.
Level of pitch change 2.
Description
Length of reverb.
Delay time until the early reflections of the reverb are
heard.
Length of the high frequency portion of the reverb,
expressed as a ratio relative to REV.TIME.
Left/right spread of the reverb sound.
Density of the reverb.
Cutoff frequency of the high pass filter.
Cutoff frequency of the low pass filter.
Balance of reverb and chorus. 0 is only chorus, 100 is only
reverb.
Modulation speed.
Pitch modulation depth.
Volume modulation depth.
Delay time from the direct sound until the modulated
sound.
Modulation waveform. SINE: sine wave, TRI: triangle wave
133
Effects Parameters
03D—Owner's Manual