Write Protecting Scene Memories - Alesis 03D Owner's Manual

170
Chapter 15—Scene Memories

Write Protecting Scene Memories

Mix scenes can be protected against accidental erasure by write protecting scene mem-
ories. Mix scenes cannot be stored to write-protected scene memories. Scene memory
data received as MIDI Bulk Dump data is ignored when the corresponding scene mem-
ory is write protected. Scene memories can be write protected individually, or in blocks
of 25 (01–25 or 26–50). Write protection settings are made on the Scene Mem. page
shown below.
Write Protecting a Single Scene Memory
1. Use the [SCENE MEMORY] button to locate the Scene Mem. page.
2. Select the scene memory using the PARAMETER wheel, SCENE MEMORY
[ ] and [
π
3. Use the cursor buttons to select the PROTECTION switch.
4. Press the [ENTER] button.
If you are using a mouse, simply click the PROTECTION switch.
When a scene memory is write protected, the word PROTECT appears next to its num-
ber and title in the scroll box, and in the scene memory area at the top of the display.
To turn off the write protection, press the [ENTER] button again. If you are using a
mouse, simply click the PROTECTION switch.
Write Protecting a block of Scene Memories
1. Select the ON switch corresponding to the
group of scene memories that you want to
protect: 01–25 or 26–50.
2. Press the [ENTER] button.
If you are using a mouse, simply click the corresponding ON switch.
To turn off the write protection, select the corresponding OFF switch and press the
[ENTER] button. If you are using a mouse, simply click the OFF switch.
03D—Owner's Manual
] buttons, or mouse.
†