Mic With 10X10Ge Sfp+ Interfaces (Srx-Mic-10Xg-Sfpp) - Juniper SRX5400 Manual

Serial number location
Related
Documentation

MIC with 10x10GE SFP+ Interfaces (SRX-MIC-10XG-SFPP)

Description
Copyright © 2014, Juniper Networks, Inc.
The serial number label is yellow and is located as shown in
Figure 12: SRX-MIC-20GE-SFP Serial Number Label
NOTE: The serial number for the mezzanine card is shown only for reference
and is never used for any purpose.
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4
Modular Port Concentrator (SRX5K-MPC) on page 18
You use MICs and MPCs to add different combinations of Ethernet interfaces to your
services gateway to suit the specific needs of your network. The SRX-MIC-10XG-SFPP
(see Figure 13 on page 23) can be installed in an MPC to add ten 10-Gigabit Ethernet
SFP+ ports.
Figure 13: SRX-MIC-10XG SFPP
MIC with ten SFP+ 10-Gigabit Ethernet ports
Fits into MPC
Supports up to 100 Gbps of full-duplex traffic
Maximum configurable MTU: 9192 bytes
MIC with 10x10GE SFP+ Interfaces (SRX-MIC-10XG-SFPP)
Figure 12 on page 23.
23