Carriage Underside Cleaning - MIMAKI JFX600-2513 Care And Maintenance

3. Performing Maintenance
1
From MENU on the touch panel, touch [MAINTENANCE].
• The Maintenance menu is displayed.
2
Touch [Daily maintenance] > [Daily station maintenance].
• The carriage moves over the table.
3
Clean the NCU.
• Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
• Insert the cleaning stick as far as the line shown in the illustration.
4
Touch [Finish] > [End] once cleaning is complete.

Carriage Underside Cleaning

The underside of the carriage becomes coated with ink wiped off by the wiper. Continuing to use the dirty
carriage underside will rub dried ink and attached dust on to the media, resulting in contaminated prints.
The print head uses an extremely delicate mechanism. Take great care when handling it.
• Be careful to avoid leaving fragments from the cleaning stick behind when cleaning. These
fragments will increase the risk of printing defects (e.g., nozzle clogging or deflection).
1
From MENU on the touch panel, touch [MAINTENANCE].
• The Maintenance menu is displayed.
2
Touch [Daily maintenance] > [Head maintenance].
• The carriage moves to the maintenance space.
10