Appendix A - Maintenance
4
Install the protector on the receptacle.
5
Install the protector on the receptacle. Rotate the collar behind the protector as necessary to secure the
protector as shown in
6
Set the power control switch to the up position to return to commercial power.
7
Install the cover on the female receptacle located on the outside of the power transfer cabinet as shown in
Figure 53 on page
66
Figure
52.
Figure 52. Receptacle Protector
67.
November 9, 2001
LTPS-UM-8007-01, Issue 1
Collar
Protector
SPX-CABFIN01, SPX-CABFIN04