Table of Contents
Advertisement
Appendix A - Maintenance
5
Grasp the heat exchanger with both hands. While holding it in its vertical position, bring it out of the cabinet.
The top fan assembly will drop so that the shoulder rivet is at the top of the retaining slot.
6
Hang the heat exchanger on the inside of the open end chamber door, between the map pocket and the door
rods as shown in
7
The top and bottom fans are now accessible for replacement.
62
Protector
panel
Figure 49. Heat Exchanger Bottom Fan Connector
Figure 50 on page
63.
November 9, 2001
LTPS-UM-8007-01, Issue 1
Connector
Heat
exchanger
SPX-CABFIN01, SPX-CABFIN04
Advertisement
Table of Contents
