Table of Contents
Advertisement
LTPS-UM-8007-01, Issue 1
S
T
PLICING AND
Do not directly view the end of any energized fiber. Wear laser safety glasses during this
procedure. Follow all local safety precautions before proceeding with splicing.
When handling fiber cables, maintain the recommended minimum bending radius (typically
5 inches).
Refer to local practices for bonding and grounding details.
1
Route the fiber cable from the splice chamber to the fiber termination shelf.
2
The fiber termination shelves come from the manufacturer with a bag of loose parts placed inside the shelf.
One 12A1 clamp and grounding kit are included. Use these parts to properly terminate and arrange the fibers;
refer to the instructions inside the bag.
Additional 12A1 clamp and grounding kits may be ordered separately as needed (one per
outside plant cable).
3
Open the termination shelf cover.
Refer to the appropriate local practice for cable preparation procedures.
SPX-CABFIN01, SPX-CABFIN04
Figure 15. Protector Stubs Laced to Support Bars
F
ERMINATING
IBER
November 9, 2001
-O
C
PTIC
ABLE
Installation
21
Advertisement
Table of Contents
