Advertisement
= Rear heating element and fan on
= Grill + spit heating element on
= Grill heating element and fan on
Oven thermostat knob (C)
By turning the oven knob clockwise we
will find the different oven temperature
values (from 50°C to max).
Led or back-light indicating oven
electrical components activation
If present, when lit, it indicates that an
electric component is inserted
Led or back-light indicating
thermostat activation
When lit it indicates that the oven or the
grill is in use. During cooking time the led
turns off each time the temperature set is
reached. It is therefore common that the
led/yellow light turns on and off several
times according to re-heating process.
Timer knob (D) " Model EKK915AAOX
only".
To set cooking time, first wind the timer
up by turning it completely once from left
to right and then back to the number of
minutes you want. The timer will ring when
the set time has elapsed.
B
Electronic programmer
" Model EKK945ABOX only".
The programmer can select the following
functions:
- Clock
- Minute counter
- Cooking time
C
- End of cooking
- Manual operation mode (set by key 4)
- Setting time backwards (set by key 5)
- Setting time forward
The digital display (N) always shows the
time and can display cooking and end
of cooking time or the minute counter
time by pressing the corresponding push
button.
N.B.: At the end of each setting
session (except for the minute
counter) the programmer turns the
oven off. Check when next using the
oven, if the programmer is not going
to be used, that the latter is set on
manual operation (see the instructions
given further on).
Setting the time (from 0.01 to 24.00 =
hh,mm)
After connecting to the electricity mains
or subsequent to a power cut, AUTO and
"0.00" will both flash simultaneously on
the display.
Press push buttons 2 and 3
simultaneously and start setting the
current time by pressing push button 5
or 6.
ENGLISH
7
D
(set by keys 2
and 3)
(set by key 1)
(set by key 2)
(set by key 3)
(set by key 6)
Advertisement
