S&C TripSaver II Quick Start Manual
  1. Manuals
  2. Brands
  3. S&C Manuals
  4. Industrial Equipment
  5. TripSaver II
  6. Quick start manual

S&C TripSaver II Quick Start Manual

Cutout-mounted recloser
Hide thumbs Also See for TripSaver II:
Table of Contents

Advertisement

Quick Links

Download this manual
TripSaver
II Cutout-Mounted Recloser
®
Outdoor Distribution (15 kV and 25 kV)

Table of Contents

Section
Introduction
Qualified Persons . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this Instruction Sheet . . . . . . . . . . . . . . . . . . . 2
Retain this Instruction Sheet . . . . . . . . . . . . . . . . . . . 2
Proper Application . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Understanding Safety-Alert Messages . . . . . . . . . . . 3
Following Safety Instructions . . . . . . . . . . . . . . . . . . 3
Replacement Instructions and Labels . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . 4
June 28, 2021
© S&C Electric Company 2007-2021, all rights reserved
TripSaver II Recloser
Service Center Configuration Kit ★
Quick Start Guide
Page
Section
Contents of Configuration Kit . . . . . . . . . . . . . . . . . . 5
Downloading Software . . . . . . . . . . . . . . . . . . . . . . . 6
Installing Software . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Launching Software . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . 7
. . . . . . . . . . . . . . . . . . .11
★ Catalog Number 5950
Instruction Sheet 461-503
Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TripSaver II and is the answer not in the manual?

Questions and answers

Related Manuals for S&C TripSaver II

Summary of Contents for S&C TripSaver II

  • Page 1: Table Of Contents

    Launching Software . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety Information Connecting to a TripSaver II Recloser . . . . . . . . 7 Understanding Safety-Alert Messages .

  • Page 2: Qualified Persons

    . Ratings for the TripSaver II Cutout-Mounted Recloser can be found in Specification Bulletin 461-33 . TripSaver II recloser ratings also are laser-etched on the recloser . Warranty The warranty and/or obligations described in S&C’s standard conditions of sale, as set forth in Price Sheet 150, plus any special warranty provisions, as set forth in the applicable product-line specification bulletin, are exclusive.

  • Page 3: Safety Information

    S&C’s website sandc.com, or call the S&C Global Support and Monitoring Center at 1-888-762-1100. NOTICE Read this instruction sheet thoroughly and carefully before installing or operating your TripSaver II Cutout-Mounted Recloser . Replacement If additional copies of this instruction sheet are needed, contact your nearest S&C Sales Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.

  • Page 4: Safety Precautions

    DO NOT disassemble a TripSaver II recloser . The control module inside the TripSaver II recloser housing is only intended for use inside the TripSaver II recloser and has not been approved for any other use . There are no customer- serviceable parts inside the recloser, and disassembling the recloser voids the warranty .

  • Page 5: Hardware

    Extension cord for ac adapter USB transceiver Carrying case Blank adhesive labels (transparent overlay also included) for writing user-configuration parameters. To be attached to the left side of This Quick Start Guide the lower TripSaver II recloser housing S&C Instruction Sheet 461-503...

  • Page 6: Software

    For each configuration kit purchased, the user is entitled to install and use TripSaver II Service Center Configuration Software on no more than two computers at a time. The latest software release is posted on the S&C Automation Customer Support Portal at sandc.com/en/...

  • Page 7: Connecting To A Tripsaver Ii Recloser

    “corded” power module (power module with ac adapter and extension cord) to the base of the TripSaver II recloser . The corded power module is ONLY intended to be used for setup and data collection when the TripSaver II recloser is de-energized and removed from the utility pole .
  • Page 8 Connecting to a TripSaver II Recloser (b) Position the power module near the base of the TripSaver II recloser, as shown in Figure 3; the module will be held in place magnetically. Figure 3. Position the power module. (c) Install the proper power outlet plug adapter onto the ac adapter. See Figure 4.
  • Page 9 Figure 7. The location of the QR code. (b) Method 2: Rotate the mode selector lever to initiate the display screens after the TripSaver II recloser is powered up. The fi rst screen to appear will contain the transceiver ID. See Figure 8.
  • Page 10 (b) Next, a Transceiver ID Request dialog box will open. Enter the transceiver ID of the TripSaver II recloser being connected to, and click on the OK button to connect. The fi rst 16 digits of the ID are pre-typed, so only the last 16 digits must be typed in.

  • Page 11: Downloading Full Instruction Sheet 461-504

    Downloading Full Instruction Sheet 461-504 Download Instruction Sheet 461-504 at: sandc.com/461-504. S&C Instruction Sheet 461-503...

Table of Contents