S&C TripSaver II User Manual

S&C TripSaver II User Manual

Gateway controller
Hide thumbs Also See for TripSaver II:

Advertisement

Quick Links

TripSaver
II Cutout-Mounted Recloser
®
TripSaver

Table of Contents

Section
Qualified Persons . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this Instruction Sheet . . . . . . . . . . . . . . . . . . . 2
Retain this Instruction Sheet . . . . . . . . . . . . . . . . . . . 2
Proper Application . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty Qualifications . . . . . . . . . . . . . . . . . . . . . . 3
Understanding Safety-Alert Messages . . . . . . . . . . . 3
Following Safety Instructions . . . . . . . . . . . . . . . . . . 3
Replacement Instructions and Labels . . . . . . . . . . . 3
March 2, 2020
© S&C Electric Company 2020, all rights reserved
II Gateway Controller:
®
User Guide
Page
Section
Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . 5
Gateway Controller Specifications . . . . . . . . . . . . . . 6
Antenna Specifications . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting to the Gateway Controller . . . . . . . . . . . 7
. . . . . . . . . . . . . . . . . . . . . .10
Instruction Sheet 461-512LD
Page

Advertisement

Table of Contents
loading

Summary of Contents for S&C TripSaver II

  • Page 1: Table Of Contents

    Qualified Persons . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents of TripSaver II Gateway Controller . . . . . . 4 Read this Instruction Sheet .
  • Page 2: Introduction

    PDF format at sandc.com/en/ support/product-literature/ . Retain this This instruction sheet is a permanent part of your TripSaver II Gateway Controller. Designate a location where you can easily retrieve and refer to this publication. Instruction Sheet...
  • Page 3: Warranty Qualifications

    Understanding Several types of safety-alert messages may appear throughout this instruction sheet and on labels and tags attached to your TripSaver II Gateway Controller. Familiarize Safety-Alert yourself with these types of messages and the importance of these various signal words:...
  • Page 4: Hardware

    Hardware Contents of TripSaver II Gateway Controller Figure 1. The ac power cord. Radio (802.15.4) 9-V Power Ethernet 1 Ethernet 2 RS-232 Wi-Fi/BT Figure 2. The TripSaver II Gateway Controller. S&C Instruction Sheet 461-512LD...
  • Page 5: Dimensional Drawings

    Hardware Dimensional Drawings Dimensions in inches (mm) 1 .661 (42) 3 .386 (86) 6-32 Mounting Hole (x4) .470 (12) .499 (13) 3 .345 (85) Figure 3. Gateway Controller S&C Instruction Sheet 461-512LD 5...
  • Page 6: Gateway Controller Specifications

    Hardware Gateway Controller Specifications IEEE 802 . 1 1 b/g/n (2 .4 GHz) Wi-Fi WPA2-PSK Security ZigBee IEEE 802 . 1 5 .4 (2 .4 GHz) Bluetooth 4 .0 (+Bluetooth low energy) Bluetooth (Max: 12 .5 dBm) GPS/GNSS 1 PPS time service for stable and traceable time reference Time management IEEE 1588 PTP Ethernet...
  • Page 7: Antenna Specifications

    Hardware Antenna Specifications Connecting to the Gateway Controller The gateway controller is professionally installed Complete the following steps to connect to the gateway equipment. The radio frequency (RF) output power does controller: not exceed the maximum limit allowed in the country of STEP 1.
  • Page 8: Software

    Software Logging in to a TripSaver II Gateway Controller Complete the following steps to log in to the controller: STEP 1. The communication gateway software is stored onboard the gateway controller and is accessed using a Web-browser interface. The default configuration of the gateway controller’s IP...
  • Page 9 Software With the CAT5 cable attached to the gateway STEP 3. controller’s Ethernet Port 1, launch a Web browser on the PC. In the URL address line, type the gateway controller default IP address of 192.168.1.1 and press the <Return> key. (Browser versions supported include Google Chrome and Internet Explorer.) The Login screen will open with a username and password...
  • Page 10: Regulatory Information

    Regulatory Information FCC Statement Industry Canada Statement This equipment has been tested and found to comply with This device complies with Industry Canada’s license- the limits of a Class A digital device, pursuant to part 15 exempt RSSs. Operation is subject to the following two of the FCC Rules.
  • Page 11 Regulatory Information Industry Canada Radiation Exposure Australia/New Zealand (ACMA) Statement The above -mentioned product complies w ith the requirements of the relevant ACMA Standards made This radio transmitter with model: Gateway Controller under the Radiocommunications Act 1992 and the has been approved by Industry Canada to operate with the Telecom mu n icat ion s Act 19 97.

Table of Contents