Fluke FiberInspector Pro FI-3000 Abridged User Manual page 8

6
1.800.561.8187
Red LED The test failed.
Green LED The test passed.
Red and The test limit is
Green LEDs have a Pass or
When the mobile app shows a live image, you can press
( ) to automatically focus the image.
Press (TEST) to analyze and transmit an endface image to
the F -I
application on your mobile device. The application
I N
and the probe's green and red LEDs show a pass or fail result.
Press again to return to the Live View screen.
Hold down for 2 seconds to turn the probe on and off.
Connector and status LED for the AC adapter/charger (see
Figure 2).
Dust cap.
www.
, so the result does not
status.
information@itm.com
.com