Fluke FiberInspector Pro FI-3000 Abridged User Manual page 19

To see a high-resolution image of the endface in a test result
(Figure 10), tap the endface graphic on the TEST RESULT
SUMMARY screen.
1.800.561.8187
To zoom in or out or to move the image, use the finger gestures
supported by your device.
To hide or see the overlay, tap the image where there is no endface.
To see details about the defects on a fiber endface, zoom in slightly on
the endface on the VIEW ALL screen, then tap the endface.
• The IMAGE tab shows the endface with defects highlighted.
• Tap the DEFECTS tab to see more details. See Figure 11.
You can swipe the screen to scroll through the endfaces.
Tap Save to save the result in the active project.
www.
information@itm.com
.com
CL11.EPS
17