Fluke FiberInspector Pro FI-3000 Abridged User Manual page 11

See Figure 4.
3. On the Live View screen, tap the Wi-Fi button.
4. In the list of Wi-Fi hotspots, tap "FI-3000_xxxxxxxx", where
6. When the probe is connected, the probe's SSID shows in green
1.800.561.8187
Hold down for 2 seconds to turn the probe on.
Open the F -I
app on your mobile device.
I N
"xxxxxxxx" is the serial number of the probe.
Enter the probe's password: 1234567890.
text on the Wi-Fi button.
If the mobile device disconnects from the probe, tap the Wi-Fi
button to reconnect.
The password is the same (1234567890) for all
probes. You cannot change the password.
If your mobile device shows a message about no
internet access, choose to stay connected to the
probe.
If your mobile device has a VPN connection, you
must disconnect it before the device can connect to
the probe.
Some mobile devices disconnect from the probe if
you do not use the probe for several minutes.
www.
Note
information@itm.com
.com
9