Fluke FiberInspector Pro FI-3000 Abridged User Manual page 28

EMC
* For more information, go to www.flukenetworks.com/support/manuals, select the
product name, then find "Radio Frequency Data for Class A" in the list of manuals.
26
1.800.561.8187
IEC 61326-1: Controlled Electromagnetic
Environment; IEC 61326-2-1
CISPR 11: Group 2, Class A
Group 2: Equipment contains ISM RF equipment
in which radio-frequency energy in the frequency
range 9 kHz to 400 GHz is intentionally
generated and used or only used, in the form
of electromagnetic radiation, inductive and/or
capacitive coupling, for the treatment of material or
inspection/analysis purposes.
Class A: Equipment is suitable for use in all
establishments other than domestic and those
directly connected to a low voltage power supply
network which supplies buildings used for domestic
purposes. There may be potential difficulties in
ensuring electromagnetic compatibility in other
environments, due to conducted and radiated
disturbances.
USA (FCC): 47 CFR 15 Intentional Radiators:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation. (15.19). Changes or
modifications not expressly approved by Fluke could
void the user's authority to operate the equipment.
(15.21)
Emissions which exceed the levels required by CISPR
11 can occur when the Product is connected to a
test object.
168 mm x 137 mm x 54 mm (6.625 in x 5.375 in x
2.125 in) (with no dust cap or adapter tip)
Length with dust cap: 191 mm (7.5 in)
326 gm (11.5 oz) (with dust cap and no adapter tip)
www. .com
information@itm.com