Fluke FiberInspector Pro FI-3000 Abridged User Manual page 15

You can attach the MPO inspection tips to the probe with the MPO
key on the left or right, as shown in Figure 6. This lets you rotate
the probe when a cabinet door or other surface is in the way of the
probe's handle (Figure 7).
The
you make the fiber numbers on endface diagrams agree with the
numbers on the connector.
•
•
When you set the
fiber number 1 is in the upper-right corner of the endface image.
1.800.561.8187
setting at the bottom of the Live View screen lets
position you use on the probe.
opposite side from the key position you use on the probe.
MPO key
www.
Set the
Set the
correctly for the type of adapter,
information@itm.com
.com
to the key
to the
MPO key
CL06.EPS
13