Download Print this page

Mercedes-Benz C-Class 2015 Owner's Manual page 98

Advertisement

Vehicles with KEYLESS-GO or KEYLESS-GO
start function: if the key is in the immediate
vicinity to the vehicle, the convenience closing
function is available.
When you lock the vehicle, you can simultane-
ously:
close the side windows
R
close the sliding sunroof or the panorama
R
sliding sunroof
On vehicles with a panorama sliding sunroof,
you can then close the roller sunblinds.
Notes on the automatic reversing feature for:
the side windows (
R
Y
the sliding sunroof or the panorama sliding
R
sunroof (
page 97)
Y
Using the key
Press and hold the & button until the side
X
windows and the sliding sunroof or the pano-
rama sliding sunroof are fully closed.
Make sure that all the side windows and the
X
sliding sunroof or panorama sliding sunroof
are closed.
Vehicles with panorama sliding sunroof:
X
press and hold the & button once more
until the roller sunblinds of the panorama slid-
ing sunroof close.
To interrupt convenience closing: release
X
the & button.
Using KEYLESS-GO
The driver's door and the door at which the han-
dle is used must both be closed. The key must be
outside the vehicle. The gap between the key
and the corresponding door handle should not
be greater than 1 m.
page 93)
Touch recessed sensor surface : on the
X
door handle until the side windows and the
sliding sunroof or the panorama sliding sun-
roof are fully closed.
Make sure you only touch recessed sensor
surface :.
Make sure that all the side windows and the
X
sliding sunroof or panorama sliding sunroof
are closed.
Vehicles with panorama sliding sunroof:
X
touch recessed sensor surface : on the door
handle again until the roller sunblinds of the
panorama sliding sunroof close.
To interrupt convenience closing: release
X
recessed sensor surface : on the door han-
dle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
Close all doors.
X
Turn the key to position 1 or 2 in the ignition
X
lock.
Pull the corresponding switch on the door
X
control panel until the side window is com-
pletely closed (
page 94).
Y
Hold the switch for an additional second.
X
If the side window opens again slightly:
Immediately pull the corresponding switch on
X
the door control panel until the side window is
completely closed (
Y
Hold the switch for an additional second.
X
If the corresponding side window remains
X
closed after the button has been released, the
side window has been reset correctly. If this is
not the case, repeat the steps above again.
Side windows
page 94).
Z
95

Advertisement

loading