Advertisement
Overview of climate control systems
130
Control panel for THERMATIC automatic climate control
Example
To set the temperature, left (
:
To set the air distribution (
;
To set the airflow (
=
To switch climate control off (
To set climate control to automatic mode (
?
To demist the windscreen (
A
To call up the climate control menu of the multimedia system (
B
Vehicles with auxiliary heating: to switch the ! residual heat on/off (
To switch the rear window heating on/off (
C
Vehicles with auxiliary heating: to switch the & auxiliary heating on/off (
D
Vehicles without auxiliary heating: to switch 0 synchronisation on/off (
E
To activate/deactivate air-recirculation mode manually (
To activate/deactivate cooling with air dehumidification (
F
To set the temperature, right (
G
Notes on using the automatic climate
control
Optimum use of the automatic climate
control
The following contains notes and recommenda-
tions on optimum use of THERMATIC automatic
climate control.
Activate climate control using the Ã
R
rocker switch. The indicator lamp above the
à rocker switch lights up. The "Cooling
with air dehumidification" function is not acti-
vated automatically in automatic mode. If
page 133)
Y
page 133)
Y
page 133)
Y
page 131)
Y
page 133)
Y
page 133)
Y
page 132)
Y
Y
page 134)
Y
page 135)
Y
page 132)
Y
necessary, activate this function
(
page 132).
Y
Set the temperature to 22 †.
R
Only use the "Windscreen demisting" function
R
briefly until the windscreen is clear again.
Only use air-recirculation mode briefly, e.g. if
R
there are unpleasant outside odours or when
in a tunnel. The windows could otherwise mist
up as no fresh air is drawn into the vehicle in
air-recirculation mode.
Vehicles with THERMATIC with auxiliary heat-
R
ing: use the "residual heat" function if you
want to heat or ventilate the vehicle interior
when the ignition is switched off. The residual
heat function can only be activated or deac-
page 300)
page 136)
Y
page 138)
Y
page 133)
Y
Advertisement
