Advertisement
Children in the vehicle
62
Suitability of the seats for attaching a belt-secured child restraint system
If you use a baby car seat of category 0 or 0+ or a rearward-facing child restraint system of category
I on a rear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch
the child restraint system.
If you use a category I, forward-facing child restraint system, you should remove the head restraint
from the respective seat, if possible (
as far as possible, lie flat against the backrest of the seat.
Make sure that the child's feet do not touch the front seat. If necessary, move the front seat forward
slightly.
For certain child restraint systems in weight categories II or III, this can mean that the area of use
is restricted. The maximum size setting of the child restraint system is not possible due to possible
contact with the roof.
Always observe the notes in the "Child restraint system" section (
system manufacturer's installation instructions.
When you remove the child restraint system you must replace the head restraints again immediately
(
page 105). All vehicle occupants must adjust their head restraints correctly before beginning the
Y
journey.
Legend for the table:
X
Seat which is unsuitable for children in this weight category.
U
Suitable for child restraint systems in the "Universal" category that are approved for use in this
weight category.
UF Suitable for forward-facing child restraint systems that belong to the "Universal" category and
are approved for use in this weight category.
L
Suitable for child restraint systems as recommended; see the "Recommended child restraint
systems" table (
and the seat are listed in the child restraint system manufacturer's vehicle model list.
Weight category
0
up to 10 kg
0+
up to 13 kg
I
9 kg to 18 kg
II
15 kg to 25 kg
III
22 kg to 36 kg
Suitability of the seats for attaching ISOFIX child restraint systems
If you use a baby car seat of category 0 or 0+ or a rearward-facing child restraint system of category
I on a rear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch
the child restraint system.
The vehicle is equipped with an automatic front-passenger front airbag deactivation system. The PASSENGER
1
AIR BAG OFF indicator lamp must be lit.
page 106). The backrest of the child restraint system must,
Y
page 64). Suitable for semi-universal child restraint systems if the vehicle
Y
Front-passenger seat
Front-
passenger
front airbag
enabled
X
X
UF, L
U, L
U, L
page 56) and the child restraint
Y
Front-
passenger
front airbag
1
deactivated
U, L
U, L
U, L
U, L
U, L
Rear seat
Left, right
U, L
U, L
U, L
U, L
U, L
Advertisement
