Advertisement
Setting the position
You can adjust the position of the head-up dis-
play on the windscreen. You can compensate for
height differences if the seat positions are
changed, for example.
Switch on the head-up display (
X
Press ò on the steering wheel to open the
X
menu list.
Press : or 9 on the steering wheel to
X
select the
Settings
Settings
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
display
display
submenu.
Press a to confirm.
X
Press : or 9 to select the
X
function.
Press a to save the setting.
X
Press : or 9 to adjust the position to a
X
level from
Level +5 +5
Level
Press a or % to save the setting.
X
Using the Memory function, you can save and
call up the set position of the head-up display as
a single memory preset (
Adjusting the brightness
The brightness of the head-up display is auto-
matically adjusted to the surrounding light con-
ditions. You can also individually adjust the
brightness of the head-up display.
Switch on the head-up display (
X
Press ò on the steering wheel to open the
X
menu list.
Press : or 9 on the steering wheel to
X
select the
Settings
Settings
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
display
display
submenu.
Press a to confirm.
X
Press : or 9 to select the
X
function.
Press the a button to save the setting.
X
Press : or 9 to adjust the brightness
X
to a level from
Level +5 +5
Level
(dark).
Press the a or % button to save the
X
setting.
page 235).
Y
menu.
Head-up
Head-up
Position
Position
(up) to
Level -5 -5
Level
(down).
page 116).
Y
page 235).
Y
menu.
Head-up
Head-up
Brightness
Brightness
(bright) to
Level -5 -5
Level
Menus and submenus
Light submenu
Switching the Intelligent Light System
on/off
Press ò on the steering wheel to open the
X
menu list.
Press : or 9 on the steering wheel to
X
select the
Settings
Settings
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
submenu.
Press a to confirm.
X
Press : or 9 to select the
X
gent Light System
gent Light System
If the
Intelligent Light System
Intelligent Light System
has been switched on, the cone of light and
the L symbol in the multifunction display
are shown in white.
Press the a button to save the setting.
X
If you switch on the
Intelligent Light
Intelligent
tem
tem
function, the following functions are activa-
ted:
Motorway mode
R
Active light function
R
Cornering light function
R
Extended range foglamps
R
If you set the dipped-beam headlamps for driv-
ing on the right/left, the multifunction display
shows the
Inactive
Inactive for
for left-side
or
Inactive for right-side traffic
Inactive for right-side traffic
play message in the
Lights
Lights
the
Intelligent Light System
Intelligent Light System
(
page 247). This display message will only
Y
appear if the setting for driving on the left/right
is set opposite to your vehicle's country version.
Further information on the Intelligent Light Sys-
tem (
page 121).
Y
Setting the dipped-beam headlamps for
driving on the left/right
This function is only available in vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
(
page 118).
Y
Press ò on the steering wheel to open the
X
menu list.
Press : or 9 on the steering wheel to
X
select the
Settings
Settings
menu.
Lights
Lights
Intelli‐
Intelli‐
function.
function
Light Sys‐
Sys‐
left-side traffic
traffic
dis-
submenu instead of
function
menu.
Z
247
Advertisement
