Advertisement
i
Further information on suitable mobile
phones can be obtained on the Internet at:
http://www.mercedes-benz.com/
connect
Searching for and authorising a mobile
phone
Before using your mobile phone with the multi-
media system for the first time, you will need to
search for the phone and then authorise (con-
nect) it. Depending on the mobile phone, author-
isation takes place by means of Secure Simple
Pairing or by entering a passkey. The multimedia
system automatically makes the procedure that
is relevant for your mobile phone available. The
mobile phone is always connected automati-
cally after authorisation. Further information on
using a mobile phone with the multimedia sys-
tem (see the Digital Owner's Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see the
manufacturer's operating instructions).
Only one mobile phone can be connected to the
multimedia system at any one time.
Searching for a mobile phone
Audio 20:
Select
Tel/
Tel/®QConnect
Connect
X
deviceQSearch for phones
device
Search for phonesQStart
search
search.
The available mobile phones are displayed.
COMAND Online:
Select
TelephoneQConnect
Telephone
X
deviceQSearch for phones
device
Search for phonesQStart
search.
search
The available mobile phones are displayed.
Symbols in the device list
Sym-
Explanation
bol
Ï
New mobile phone found, not yet
authorised.
Ñ
Mobile phone is authorised, but is
not connected.
#
Mobile phone is authorised and
connected.
Connecting the mobile phone
Start
Connect
Start
Operating system
Authorisation using Secure Simple Pairing:
Select the mobile phone.
X
A code is displayed in the multimedia system
and on the mobile phone.
If the codes match: select
X
timedia system.
Confirm the code on the mobile phone.
X
Depending on the mobile phone used, con-
firm the connection to the multimedia system
and for the PBAP and MAP Bluetooth
files. The prompt to confirm may take up to
two minutes to be displayed (see the manu-
facturer's operating instructions).
If the codes are different: select
X
multimedia system.
The process is cancelled.
Repeat authorisation.
Authorisation by entering a passkey:
Select the Bluetooth
X
phone.
The input menu for the passkey is displayed.
Choose a one- to sixteen-digit number com-
X
bination as a passkey.
Enter the passkey on the multimedia system.
X
Press ¬ to confirm.
X
Enter and confirm the passkey on the mobile
X
phone. Depending on the mobile phone used,
confirm the connection to the multimedia sys-
tem and for the PBAP and MAP Bluetooth
profiles. The prompt to confirm may take up
to two minutes to be displayed (see the man-
ufacturer's operating instructions).
i
Mobile phones that are connected to the
optionally available telephone module with
®
Bluetooth
(SAP profile) are displayed sepa-
rately in the device list. These are found below
the entry
MB SAP module
MB SAP module phones
Switching between mobile phones
If you have authorised more than one mobile
phone, you can switch between the individual
phones.
Multimedia system:
Select
Connect device
Connect
device.
X
Select a mobile phone from the device list.
X
Yes
Yes
on the mul-
®
pro-
No No
on the
®
name of the mobile
®
phones.
Z
303
Advertisement
