Advertisement
Sliding sunroof
100
Opening and closing roller sunblinds
To open
:
To open
;
To close
=
You can only close the roller sunblinds when the
panorama sliding sunroof is closed.
Turn the key to position 1 or 2 in the ignition
X
lock.
Press the 3 button in direction :.
X
Both roller sunblinds open, then the sliding
roof is raised.
Pull the 3 button in direction ;.
X
The sunblinds open
Pull the 3 button in direction =.
X
The roller sunblinds close when the panorama
sliding roof is closed.
If you press or pull the 3 switch beyond the
point of resistance, automatic operation is star-
ted in the corresponding direction. You can stop
automatic operation by pressing or pulling
again.
Resetting the panorama sliding sun-
roof or the front roller sunblind
!
If the panorama sliding sunroof and the
roller sunblinds cannot be fully opened or
closed after resetting, contact a qualified spe-
cialist workshop.
If the panorama sliding sunroof or the roller sun-
blinds do not move smoothly, reset the pano-
rama sliding sunroof or the roller sunblinds.
Turn the key to position 1 or 2 in the ignition
X
lock.
Pull the 3 switch repeatedly to the point of
X
resistance in the direction of arrow : until
the panorama sliding sunroof is fully closed.
Keep the 3 switch pulled for an additional
X
second.
Pull the 3 switch several times in the
X
direction of arrow : until the roller sunblinds
are closed.
Keep the 3 switch pulled for an additional
X
second.
Make sure that the panorama sliding sunroof
X
and the roller sunblinds can be fully opened
and closed again.
If this is not the case, repeat the steps above
X
again.
Advertisement
