Advertisement
Driving systems
210
apply to objects that are at the same level as
the ball coupling.
Reverse carefully, making sure that trailer
X
drawbar locating aid ; points approximately
in the direction of trailer drawbar =.
Reverse carefully until trailer drawbar = rea-
X
ches the red guide line.
The distance between the trailer drawbar and
the red guide line is now approximately
0.30 m.
Couple up the trailer (
X
"Wide-angle" function
Symbol for the wide-angle view function
:
Own vehicle
;
=
PARKTRONIC warning displays
You can also use the reversing camera to select
a wide-angle view.
When PARKTRONIC is operational (
a symbol for your own vehicle appears in the
display of the multimedia system. If the
PARKTRONIC warning displays are active, warn-
ing displays = light up in the multimedia system
display in yellow or red respectively.
Object detection
The reversing camera helps detect moving and
stationary objects. If an object (person, vehicle
or other obstacle) is detected, this object is
marked with a bar. Objects located some dis-
tance away from the vehicle are marked with a
yellow bar. If the distance to the object is very
small, the bar is displayed in red.
Object detection only works in wide-angle view.
To ensure that you can use the function, it must
be switched on in the multimedia system (see
the separate operating instructions).
page 227).
Y
page 199),
Y
360° camera
General notes
The 360° camera is a camera system that con-
sists of four cameras.
The system evaluates images from the following
cameras:
reversing camera
R
front camera
R
two side cameras in the exterior mirrors
R
The cameras cover the immediate surroundings
of the vehicle. The system assists you, e.g. when
parking or at exits with reduced visibility.
You can show images from the 360° camera in
full-screen mode or in seven different split-
screen views on the multimedia system. A split-
screen view also includes a top view of the vehi-
cle. This view is calculated from the data sup-
plied by the installed cameras (virtual camera).
The seven split-screen views are:
Top view and image from the reversing cam-
R
era (130° viewing angle)
Top view and image from the front camera
R
(130° viewing angle without displaying the
maximum steering wheel angle)
Top view and enlarged rear view
R
Top view and enlarged front view
R
Top view and trailer view (vehicles with trailer
R
tow hitch)
Top view and images from the rear-facing side
R
cameras (rear wheel view)
Top view and images from the forward-facing
R
side cameras (front wheel view)
When the function is active and you shift the
transmission from D or R to N, the guide lines
are hidden in the multimedia system.
When you change between transmission posi-
tions D and R, you see the previously selected
front or rear view.
Distances measured by PARKTRONIC will also
be optically displayed:
as red or yellow brackets around the vehicle
R
symbol in top view in split-screen mode or
at the bottom right as red or yellow brackets
R
around the vehicle symbol in full-screen mode
The line thickness and colour of the brackets
show how far the vehicle is from an object.
Advertisement
